Trace-ID’s RAIN RFID TAR17 V2 tag with the IMPINJ M700 chip series was developed to improve the performance of its predecessor and is suitable for RFID solutions for retail item-level implementations, such as apparel traceability. It is also suitable for the pharmaceutical, cosmetics and healthcare industries due to its size. Finally, it is also suitable for RFID systems in supply chain, logistics and inventory.
Users interested in TAR17 are also visiting the TE27 tag page.
If you are thinking of implementing an RFID system in your business, do not hesitate to contact us. Our team of representatives will be happy to help you with your project.
General characteristics
Wet/White Wet Inlay dimensions: 44,5 x 19 mm.
Antenna dimensions: 42 x 16 mm.
Standard pitch: 21,6 mm.
Operating frequency: Global (860-960MHz).
For all Impinj M700 Series RAIN RFID tag chips: M730, 750, 770, 780, 781
EPC memory: 128 bits, 96 bits, 128 bits, 496 bits, 128 bits.
User memory: 0 bits, 32 bits, 32 bits, 128 bits, 512 bits
Inlay substrate material: PET.
Inlay-to-liner adhesive: SH3020 (Arconvert).
Liner material: CC62 (Arconvert).
Antenna dimensions: 42 x 16 mm.
Standard pitch: 21,6 mm.
Operating frequency: Global (860-960MHz).
For all Impinj M700 Series RAIN RFID tag chips: M730, 750, 770, 780, 781
EPC memory: 128 bits, 96 bits, 128 bits, 496 bits, 128 bits.
User memory: 0 bits, 32 bits, 32 bits, 128 bits, 512 bits
Inlay substrate material: PET.
Inlay-to-liner adhesive: SH3020 (Arconvert).
Liner material: CC62 (Arconvert).
Total thickness overchip: 170 microns.
Standard web width: 55 mm
Unwind direction: Label side out
RFProtocol: RAINRFID/ISO-18000-63 and EPCglobal Gen 2v2 compliant
RoHS: EU Directive 2011/65 EU Compliant
Quality assurance: 100% read tested w/o of tolerance inlay marked
Operating temperature: –40ºC to 85ºC
Standard web width: 55 mm
Unwind direction: Label side out
RFProtocol: RAINRFID/ISO-18000-63 and EPCglobal Gen 2v2 compliant
RoHS: EU Directive 2011/65 EU Compliant
Quality assurance: 100% read tested w/o of tolerance inlay marked
Operating temperature: –40ºC to 85ºC
